- Ex-motors with rated output 15/20/25 hp
- Tube Ø 4'', stainless 304 or 316
- Suitable for installation up to 5' beneath substrate level. Higher immersion depths on request
- Authorized for ex-zone 1 within the tank and ex-zone 2 outside the tank
- ss304 version of tube and sealing plate, optional ss316
- Sealing through maintenance-free sealing membrane EPDM 60
- Inclination adjustment by upper control arm, toothed rack with winch or hydraulic drive
- Fast installation outside the tank
- POM protection to minimize abrasion
- Giantmix FR HY only with PTO drive and without motor possible
Technical data
Dimensions
| Type |
A [ft] |
B [ft] |
C [ft] |
D
|
E [in] |
F [ft] |
G* |
| FR3/FR4/FR5 (480 rpm) |
11.5 / 14.8 |
9.5 / 12.8 |
3.2 |
30° |
Ø4 |
6.5 / 9.8 |
± 11° / ± 25° |
|
| FR3/FR4 (330 rpm) |
11.5 / 14.8 |
9.5 / 12.8 |
3.9 |
30° |
Ø4 |
6.5 / 9.8 |
± 11° / ± 25° |
* Vertical inclination ( ± 11°) via upper link or optional ± 25° via rack winch
Further information
Application:The GIANTMIX FR 30° has been specially designed to optimize biological processes in primary and secondary digesters with nearly constant substrate levels.
Easy maintenance:
A strong advantage of the GIANTMIX design is that most maintenance can be performed from the outside,without having to open or shut down the digester.
Optional PTO drive:
The GIANTMIX FR can be ordered with an optional protective device and PTO connection.
